TMX90 laser machine (1000 x 600 MM) CO2 Laser Cutting Machines

0844 800 4727

TMX90 laser machine (1000 x 600 MM)

80W - 100W DC (CO2) or 30W - 175W RF (CO2) Laser Cutting and Laser Engraving Machine
1000 x 600 mm work area.
British Design, British Manufactured laser machine.

Prices from £5,810 *

The floor-standing TMX90 is a powerful, versatile cutting-engraving machine - ideal for those who need a large work area for both engraving and cutting, with higher power for faster processing.

Our TMX90 has the option of 80W or 100W DC lasers, or RF laser powers from 30W to 175W - please contact our sales team for details.

The British designed and British manufactured TMX90 is a popular machine for many types of industry and education.

* PLEASE NOTE: Price excludes VAT, delivery / installation / training and all ancilliary parts. Price is for lowest DC CO2 laser power available as standard for this machine size. Prices subject to change without notice. CTR's standard terms and conditions apply. Please contact us for a full quotation for the machine specification suitable for your work, as quotations are valid for a stated period of time (see quotation for details).


Model Name

[DC laser] TMX90
[RF laser] TMX90-A

Machine Type Laser cutting and Laser engraving machine.
Control Interface 32 BIT DSP.
Memory 32 M flash memory in the machine for job storage.
Work Size 1000 x 600 mm
with front/back through doors.
Up / Down Work Table (Bed) 250 mm mechanically adjustable.
Laser Tube Type [DC laser] CO2 sealed glass DC *Diamond*.
[RF laser] CO2 sealed metal RF.
Available Laser Power [DC laser] 80W / 100W CO2.
[RF laser] 30W / 40W / 60W / 80W / 100W / 120W / 175W CO2.
Speed Range 0.1 mm/sec to 800 mm/sec.
Software Resolution 20,000 DPI.
Electronic Precision < 0.01 mm.
Angle Accuracy > 0.1º
Repeatability > 0.1 mm.
Hardware RD Controller
Software LightBurn
Accepted File Formats DXF, AI, PDF, HPGL, PLT, RD, SVG, LBRN
Interface USB2 and Ethernet
Driver Type X and Y micro step motor drives.

[DC laser] 12 months machine and consumables warranty.
[RF laser] 24 months warranty.

Support Unlimited, lifetime support by telephone and email.
Machine Dimensions *
(Width x Depth x Height)
1420 x 890 x 1190 mm
(80W DC machine size specified - others may vary. Please contact CTR for details)
Machine Weight (approx) 235 kg.
Machine Weight with integral filter system (approx) 330 kg.

This laser machine is mounted on castors.
This means that it is possible to move the machine to allow room for service work when required.

* To ensure easy traversing of doorways corridors etc please add 20mm to the machine dimensions displayed. Please be aware that different laser machine powers may alter the outer dimensions of the laser machine to facilitate the size of the laser tube. Please contact CTR for more information.


The below dimensions are the maximum sizes for each machine. Different laser powers may result in a more compact foot print than stated below.

Machine Footprint - 1420mm x 890mm
Max. Work Area - 1000mm x 600mm

The TMX90 comes with:

  • 80W / 100W Diamond laser tube, or 30W - 175W RF (CO2) laser power.
  • A new larger bed size of 1000 x 600mm!
  • A minimum of 12 months warranty: laser machine and tube.
  • Knife-edge bar bed (adjustable height up to 250mm), with accurate, reliable mechanics.
  • Optical path red dot pointer.
  • Air assist pump.
  • Sealed electronic water cooling unit or air cooling system, dependant on laser type (DC or RF).
  • A range of HEPA standard fume filtration (optional integral, external or specialist systems available).
  • Laser design software.
  • On-site installation.
  • Full operator training.
  • On-site warranty.
  • Unlimited support.



British Design. British Manufacture

The TMX90 laser machine is designed and built in our Northamptonshire factory, to ensure quality control with the standard of this machine.

Laser tube

[DC laser] The Diamond laser tubes have increased power, starting at 80W. These tubes have an estimated life of 10,000 hours and come with 12 months warranty.
[RF laser] The metal RF laser powers we offer, from 30W to 175W, offer an outstanding >25,000 hours of use and 24 months warranty.

Knife-edge bar bed

Strong, aluminium bar bed for supporting flat, large pieces of material. These specially designed bed bars are easy to remove and clean.

Mechanically adjustable bed height for items up to 250mm deep

You can mechanically, accurately move the laser machine bed up or down to fit a wide range of materials and products.

Sealed laser cooling unit [DC laser] A complete, fully enclosed water chiller unit, with interlocks to ensure the protection of your laser tube.
[RF laser] A complete air cooling system with interlocks to ensure the protection and maximum efficiency of your RF laser.
Fume filtration The option of a fume filtration unit built into the base of this laser machine, giving you a reduced footprint and HEPA standard safety, or an external system to give you higher capacity. Click here for information on filtration.
Red dot pointer module For simple, accurate positioning of the work on materials.
Laser design software Easy-to-use laser software for designing or importing files to laser cut and engrave.
On-site installation One of our trained installation engineers will deliver, install and set up your products on-site to our high specification to ensure you have the best possible start.
Full operator training

One of our trained installation engineers will provide full training on how to use the software provided with your laser machine, laser operation and routine maintenance.

On-site warranty

If there is a problem with your laser machine within the warranty period, we'll visit you to sort it out.

Unlimited support Total peace of mind. If you have a question about your laser machine at any time during the life of the machine, simply contact us during our normal open hours for assistance.


Fume Filtration units.

Our British TMX90 can be offered with range of HEPA fume filtration units including specialist filters for working with specific materials.

Honeycomb Bed.

We offer a custom-made honeycomb bed up to the full work area of our TMX90 for working with smaller items or softer materials such as fabrics. The honeycomb bed is easily fitted and removed into the laser so it can be put in for jobs as required, in addition to the knife-edge bar bed which is a standard feature with the TMX90 laser machine.

Vacuum Bed.

CTR offer a British designed and manufactured vacuum bed with our TMX90 laser machine. This vacuum bed gives a great advantage when working with flexible materials which do not traditionally lay flat, such as leather or thin woods. This vacuum bed holds the material flat to the special honeycomb work area to give you better results when laser cutting and engraving.

Rotary Attachment.

CTR offer a British designed and manufactured rotary attachment for our laser machines. This gives you the ability to work with cylindrical items such as engraving on wine bottles, flutes, glasses and tumblers, cylindrical poles and other similar shapes of materials.

People using the TMX90 laser include:

  • Modelmakers
  • Universities, schools, colleges and academies
  • Personalised engraving companies
  • Craft suppliers
  • Woodworkers
  • Plastic fabricators
  • Slate / tile engravers and more.

TMX90 laser cut acrylic handle industrial sampleTMX90 laser engraved granite house number sampleLaser cut model ATAT sampleLaser cut textiles bag sample - leather cutting laserLaser engraved metal car tax disk brandingLaser cut wooden detail sample

Do you need a different size of laser machine?

We offer a wide range of machine sizes and powers, so simply contact our sales team, or look at one of our other machine pages below...

TMX65 (650 x 420mm work area)

TMX12 (1200 x 900mm work area)

TMK15 (1500 x 1300mm work area)

TMK20 (2000 x 1500mm work area)


Looking for something even larger?

As British designers and manufacturers, we can offer bespoke machines to suit your applications, from Concept To Reality. Contact us now to find out what we can offer your company.