TMX12 laser machine (1200 x 900 MM) CO2 Laser Cutting Machines

0844 800 4727

TMX12 laser machine (1200 x 900 MM)

80W - 120W DC (CO2) or 30W - 200W RF (CO2) Laser power.
1200 x 900 mm work area.
British Design, British Manufactured laser machine.

The floor-standing TMX12 is a medium sized, powerful, versatile laser cutting-engraving machine - ideal for those who need a good sized work area for both engraving and cutting, with higher power for faster processing.

Our TMX12 has the option of RF laser powers from 30W to 200W - please contact our sales team for details.

The British designed and British manufactured TMX12 is a popular laser machine for many types of industry and higher education.

Technical Parameters *

 

Model Name

[DC laser] TMX12
[RF laser] TMX12-A

Machine Type Laser cutting and Laser engraving machine.
Control Interface 32 BIT DSP.
Memory 32 M flash memory in the machine for job storage.
Work Size 1200 x 900 mm
Up / Down Work Table (Bed) 250 mm mechanically adjustable.
Laser Tube Type [DC laser] CO2 sealed glass DC *Diamond*.
[RF laser] CO2 sealed metal RF.
Available Laser Power [DC laser] 80W / 100W CO2.
[RF laser] 30W / 40W / 60W / 80W / 100W / 200W CO2.
Speed Range 0.1 mm/sec to 800 mm/sec.
Software Resolution 20,000 DPI.
Electronic Precision < 0.01 mm.
Angle Accuracy > 0.1º
Repeatability > 0.1 mm.
Software Easycut 5.3
Accepted File Formats HPGL, BMP, DXF, AI, G-Code.
Interface USB2
Driver Type X and Y micro step motor drives.
Warranty

[DC laser] 12 months machine and consumables warranty.
[RF laser] 24 months warranty.

Support Unlimited, lifetime support by telephone and email.
Machine Dimensions*
(Width x Depth)
1593 x 1138 mm.
[NB: machine dimensions may vary with different laser powers]*

This laser machine is mounted on castors.
This means that it is possible to move the machine to allow room for service work when required.

* To ensure easy traversing of doorways corridors etc please add 20mm to the machine dimensions displayed. Please be aware that different laser machine powers may alter the outer dimensions of the laser machine to facilitate the size of the laser tube. Please contact CTR for more information.

Dimensions

The below dimensions are the maximum sizes for each machine. Different laser powers may result in a more compact foot print than stated below.

Machine Footprint - 1593mm x 1138mm
Max. Work Area - 1200mm x 900mm

The TMX12 comes with:

  • 80W / 100W / 120W Diamond CO2 laser tube or 30W-200W RF (CO2) laser power.
  • A minimum of 12 months warranty: laser machine and tube.
  • Knife-edge bar bed (adjustable height up to 250mm), with accurate, reliable mechanics.
  • Optical path red dot pointer.
  • Air assist pump.
  • Sealed laser cooling system (water or air system depending on laser type DC or RF).
  • Laser design software.
  • On-site installation.
  • Full operator training.
  • On-site warranty.
  • Unlimited support.

 

 

British Design. British Manufacture

This laser machine is designed and built in our Northamptonshire factory, to ensure quality control with the standard of this machine.

Laser tube

[DC laser] The Diamond laser tubes have increased power, starting at 80W. These tubes have an estimated life of 10,000 hours and come with 12 months warranty.
[RF laser] The metal RF laser powers we offer, from 30W to 200W, offer an outstanding >25,000 hours of use and 24 months warranty.

Knife-edge bar bed

Strong, aluminium bar bed for supporting flat, large pieces of material. These specially designed bed bars are easy to remove and clean.

Mechanically adjustable bed height for items up to 250mm deep

You can mechanically, accurately move the laser machine bed up or down to fit a wide range of materials and products.

Sealed laser cooling unit [DC laser] A complete, fully enclosed water chiller unit, with interlocks to ensure the protection of your laser tube.
[RF laser] A complete air cooling system with interlocks to ensure the protection and maximum efficiency of your RF laser.
Red dot pointer module For simple, accurate positioning of the work on materials.
Laser design software Easy-to-use laser software for designing or importing files to laser cut and engrave.
On-site installation One of our trained installation engineers will deliver, install and set up your products on-site to our high specification to ensure you have the best possible start.
Full operator training

One of our trained installation engineers will provide full training on how to use the software provided with your laser machine, laser operation and routine maintenance.

On-site warranty

If there is a problem with your laser machine within the warranty period, we will visit you to sort it out.

Unlimited support Total peace of mind. If you have a question about your laser machine at any time during the life of the machine, simply contact us during our normal open hours for assistance.

 

Fume Filtration Unit.

CTR offer a range of fume filtration units designed for use with our larger range of laser machines. These filtration systems range in size and are available for specific applications.

Please contact us for more information or a price quotation.


Rotary Attachment.

CTR offer a British designed and manufactured rotary attachment for this laser machine, offering you the ability to work with cylindrical items such as engraving on wine bottles, flutes, glasses and tumblers, cylindrical poles and other similar shapes of materials.


Honeycomb Bed.

We offer a custom-made honeycomb bed up to the full work area of our lasers for working with smaller items or softer materials such as fabrics. The honeycomb bed is easily fitted and removed into the laser so it can be put in for jobs as required, in addition to the knife-edge bar bed which is a standard feature with our TMX laser machine range. Alternatively, you can have the honeycomb bed fitted as a standard feature without the bar bed - please contact CTR for details.


Vacuum Bed.

CTR offer a British designed and manufactured vacuum bed with our laser machines. This vacuum bed gives a great advantage when working with flexible materials which do not traditionally lay flat, such as leather or thin woods. This vacuum bed holds the material flat to the special honeycomb work area to give you better results when laser cutting and engraving.

Other businesses using the TMX12 laser machine are:

  • Business start-ups
  • prop / prototype manufacturers
  • schools, colleges and universities
  • plastics fabricators
  • woodworking companies
  • architects
  • modelmakers
  • shoe makers and leather workers
  • sign makers and many more!

Do you need a different size of laser machine?

We offer a wide range of machine sizes and powers, so simply contact our sales team, or look at one of our other machine pages below...

TMX65 (650 x 420mm work area)

TMX90 (1000 x 600mm work area)

TMK15 (1500 x 1300mm work area)

TMK20 (2000 x 1500mm work area)

 

Looking for something even larger?

As British designers and manufacturers, we can offer bespoke machines to suit your applications, from Concept To Reality. Contact us now to find out what we can offer your company.