TMX65 laser machine (650 x 420 MM) CO2 Laser Cutting Machines

0844 800 4727

TMX65 laser machine (650 x 420 MM)

50W-80W DC (CO2) or 30W-80W RF (CO2) Laser Engraving and Laser Cutting Machine.
650 x 420 mm work area.
British Designed, British Manufactured laser machine.

Prices from £4,550 *

The British designed and manufactured TMX65 is a machine now available due to popular demand for a laser ideally suited to many types of industry and education, including schools, colleges, start-up businesses, hobbyists and more.

The floor-standing TMX65 is a compact, versatile laser engraving-cutting machine - ideal for those looking for an entry level laser machine for cutting and engraving a wide range of materials. Click here to read even more about what this machine is an what it can do.

Our TMX65 has the option of 50W or 80W DC laser, or RF laser powers from 30W to 80W - please contact our sales team for details.

* PLEASE NOTE: Price excludes VAT, delivery / installation / training and all ancilliary parts. Price is for lowest DC CO2 laser power available as standard for this machine size. Prices subject to change without notice. CTR's standard terms and conditions apply. Please contact us for a full quotation for the machine specification suitable for your work, as quotations are valid for a stated period of time (see quotation for details).

Technical Parameters *


Model Name

[DC laser] TMX65
[RF laser] TMX65-A

Machine Type Laser cutting and Laser engraving machine.
Control Interface 32 BIT DSP.
Memory 32 M flash memory in the machine for job storage.
Work Size 650 x 420 mm
with front/back through doors.
Up / Down Work Table (Bed) 200 mm height adjustable.
Laser Tube Type [DC laser] CO2 sealed glass DC.
[RF laser] CO2 sealed metal / ceramic RF.
Available Laser Power [DC laser] 50W / 80W CO2.
[RF laser] 30W / 40W / 60W / 80W CO2.
Speed Range 0.1 mm/sec to 800 mm/sec.
Software Resolution 20,000 DPI.
Electronic Precision < 0.01 mm.
Angle Accuracy > 0.1º
Repeatability > 0.1 mm.
Hardware RD Controller
Software LightBurn
Accepted File Formats DXF, AI, PDF, HPGL, PLT, RD, SVG, LBRN
Interface USB2 and Ethernet
Driver Type X and Y micro step motor drives.
Warranty [DC laser] 12 months machine warranty. 3 months consumables warranty.
[RF laser] 24 months warranty.
Support Unlimited, lifetime support by telephone and email.
Machine Dimensions*
(Width x Depth x Height)

1100 mm x 660 mm x 1060 mm
(50W machine dimensions, others may vary - please contact CTR for advice)

Click here for more information on machine dimensions.

TMX65 80W DC dimensions available here.

Machine Weight (approx) 110 kg
Machine Weight with integral filter system (approx) 180 kg

This laser machine is mounted on castors.
This means that it is possible to move the machine to allow room for service work when required.

* To ensure easy traversing of doorways corridors etc please add 20mm to the machine dimensions displayed. Please be aware that different laser machine powers may alter the outer dimensions of the laser machine to facilitate the size of the laser tube. Please contact CTR for more information.


The below dimensions are the maximum sizes for each machine. Different laser powers may result in a more compact foot print than stated below.

Machine Footprint - 1100mm x 660mm
Max. Work Area - 650mm x 420mm

The TMX65 comes with:

  • 50W or 80W DC CO2 laser tube, or a range of available RF CO2 laser powers.
  • A minimum of 12 months machine warranty. 3 months consumables warranty - please request a no-obligation quotation for full details.
  • Knife-edge bar bed (adjustable height up to 200mm), with accurate, reliable mechanics.
  • Red dot pointer.
  • Air assist pump.
  • Sealed electronic water cooling unit or air cooling system, dependant on laser type (DC or RF).
  • Optional extra: HEPA standard fume filtration.
  • Laser design software.
  • On-site installation.
  • Full operator training.
  • On-site warranty.
  • Unlimited support.


British design. British manufacture.

The TMX65 laser machine is designed and built in our Northamptonshire factory, to ensure quality control with the standard of this machine.

CO2 laser tube (DC or RF)

The laser tube gives you a range of available laser powers for good quality cutting and engraving.

Knife-edge bar bed

Strong, aluminium bar bed for supporting flat, large pieces of material. These specially designed bed bars are easy to remove and clean.

Adjustable bed height for items up to 200mm deep

You can move the laser machine bed up or down to fit a wide range of materials and products.

Sealed laser cooling system [DC laser] A complete, fully enclosed water chiller unit, with interlocks to ensure the protection of your laser tube.
[RF laser] A complete air cooling system with interlocks to ensure the protection and maximum efficiency of your RF laser.
Optional fume filtration unit We recommend the use of a fume filtration unit with this laser machine for health and safety reasons. This is available as a stand-alone unit with your laser. Click here for information on filtration.
Red dot pointer module For simple, accurate positioning of the work on materials.
Laser design software Easy-to-use laser software for designing or importing files to laser cut and engrave.
On-site installation One of our trained installation engineers will deliver, install and set up your products on-site to our high specification to ensure you have the best possible start.
Full operator training

One of our trained installation engineers will provide full training on how to use the software provided with your laser machine, laser operation and routine maintenance.

On-site warranty

If there is a problem with your laser machine within the warranty period, we will visit you to sort it out.

Unlimited support Total peace of mind. If you have a question about your laser machine at any time during the life of the machine, simply contact us during our normal open hours for assistance.


Please download our TMX65 laser machine sales brochure here.

Fume Filtration Unit.

CTR offer a range of fume filtration units designed for use with our range of laser machines. These filtration systems range in size and are available for specific applications - please contact us for more information or a price quotation.

Honeycomb Bed.

We offer a custom-made honeycomb bed up to the full work area of our TMX65 for working with smaller items or softer materials such as fabrics. The honeycomb bed is easily fitted and removed into the laser so it can be put in for jobs as required, in addition to the knife-edge bar bed which is a standard feature with the TMX65 laser machine. Alternatively, you can have the honeycomb bed fitted as a standard feature of the TMX65 without the bar bed - please contact CTR for details.

Vacuum Bed.

CTR offer a British designed and manufactured vacuum bed with our TMX65 laser machine. This vacuum bed gives a great advantage when working with flexible materials which do not traditionally lay flat, such as leather or thin woods. This vacuum bed holds the material flat to the special honeycomb work area to give you better results when laser cutting and engraving.

Rotary Attachment.

CTR offer a British designed and manufactured rotary attachment for our TMX65 laser machine. This gives you the ability to work with cylindrical items such as engraving on wine bottles, flutes, glasses and tumblers, cylindrical poles and other similar shapes of materials.

Other businesses using the TMX65 are:

  • Business start-ups
  • Craft suppliers
  • Prop / prototype manufacturers
  • Schools and colleges
  • Personalised item manufacturers (photo/text engraving etc.)
  • Label manufacturers
  • Woodworking companies
  • Architects
  • Modelmakers and many more!

Please download our TMX65 laser machine sales brochure here.


Do you need a larger machine?

We offer a wide range of machine sizes and powers, so simply contact our sales team, or look at one of our other machine pages below...

TMX90 (1000 x 600mm work area)

TMX12 (1200 x 900mm work area)

TMK15 (1500 x 1300mm work area)

TMK20 (2000 x 1500mm work area).


Looking for something even larger?

As British designers and manufacturers, we can offer bespoke machines to suit your applications, from Concept To Reality. Contact us now to find out what we can offer your company.