CTR Lasers - What Laser

0844 800 4727

What Laser

Which machine is right for you?

So, you've reached the point where you know you want a machine for processing your materials. Maybe you've done some searches online and are swamped with a mass of information that doesn't seem to point you to the answer of that all important question – "which machine do I need for my work?"

We're here to help.

By working through the following points you can narrow down the choice of machines to one (or a small choice) that will suit your work. You'll need to be honest with yourself – it might be nice to have a laser than can cut 10mm sheet metals, but if you're realistically only going to use the laser to cut 5mm acrylics and engrave woods then keep that in mind and don't get distracted by the options available, otherwise you'll be looking at a much higher initial cost than needed for a machine you probably won't fully utilise.

While we've tried to cover as much as possible, the following questions are meant as general guidance and may not cover your application(s) if they are unusual or unique. In this instance, please contact our sales team for assistance in choosing the best machine for you.

Please be aware that this information is meant as a guide, and we strongly recommend speaking to or emailing one of our sales team to ensure the machine you're looking at is the right one for your jobs. We don't "box-shift" our lasers, and we certainly don't want to sell you a machine that isn't going to do what you want it to do, any more than you want to spend money on a machine that won't help with your work!

We're here to help, so please contact us and use our knowledge as a resource.